Sikkerhet & Personvern/Ip-Sikkerhet/Utendørs
SmartLife Utendørs kamera
Wi-Fi | Full HD 1080p | IP65 | Cloud Storage (valgfritt) / microSD (ikke inkludert) | 12 V DC | Nattsyn | Android™ / IOS | Hvit / Sølv
SmartLife Utendørs kamera
Wi-Fi | Full HD 1080p | IP65 | Cloud Storage (valgfritt) / microSD (ikke inkludert) | 12 V DC | Nattsyn | Android™ / IOS | Hvit / Sølv
Full HD-oppløsning
Det registrerer i Full HD-oppløsning (1920 x 1080 piksler) som gir bilder med fullstendig klarhet. I tillegg er kameraet like kraftig om natten med nattsynmodus som har en rekkevidde på 15,0 m.
Vanntett
Dette IP-kameraet, som er fullstendig innkapslet i et særdeles vanntett hus, tar opp på microSD-kort med en kapasitet på inntil 128 GB (medfølger ikke).
Krystallklart
Kameraet tar opp HD-videoer og bilder på 1280 x 720 piksler med CMOS-sensoren på 1/3 tomme for krystallklar oppløsning. Kameraet aktiveres når det oppdager lyd eller bevegelse.
Toveiskommunikasjon
Det er mulig å kommunisere via kameraet ettersom toveis snakking og lytting er aktivert - noe som betyr at det kan brukes på nesten samme måte som en telefon når de er innenfor området.
Enkelt oppsett
Det medfølger et kamerafeste med enheten, og hurtigoppstartsveiledningen sikrer at du kan installere den på bare et øyeblikk.
Om Nedis® SmartLife
Oppdag et bredt og stadig større utvalg av produkter - som pærer, brytere, kontakter, sensorer og kameraer - som kan styres gjennom en brukervennlig og intuitiv app. Talestyringsfunksjoner er støttet av Amazon Alexa og Google Home, og du trenger ikke noe annet enn et eksisterende Wi-Fi-nettverk. Dette er det sammenkoblede, smarthjemmet gjort på den enkle måten.
Enten du ser etter en enkel smart pære eller kontakt eller ønsker å automatisere hele huset, vil disse løsningene vise deg hvor tilgjengelig smartteknologi er i dag.
Egenskaper
• smart utendørs IP-kamera - sørger for et trådløs tilkoblet sikkerhetssystem med enkel installasjon for utendørsområdet på en eiendom. • Full HD-oppløsning - for å ta opp krystallklare bilder • enkelt å koble direkte til Wi-Fi-nettverket - trenger ikke et separat tilkoblingspunkt • leveres med et kamerafeste • fullt støttet av alle andre produkter i Nedis® SmartLife-serien
Anbefalt pris (Inkl. mva.)
NOK 649
Innholdet i pakken
IP-kamera
Strømadapter
Kamerafeste
Veiledning for hurtiginstallasjon
Produktspesifikasjoner
| Farge |
Hvit Sølv |
|---|---|
| Innebygd mikrofon |
Ja |
| Strømkildetype |
Nettstrøm drevet |
| Materiale |
Plast |
| Nettplugg |
Euro / Type C (CEE 7/16) |
| Cloud innspilling funksjonalitet |
Ja |
| Innebygget høytaler |
Ja |
| Kompatibel med |
Nedis® SmartLife |
| Betraktningsvinkel |
110 ° |
| Bildebrikke |
1/3" CMOS |
| LED |
1 |
| Tilbehør |
Kamera Mount AC-Adapter, Europaisk Plugg |
| Input Current |
1 A |
| Trådløs teknologi |
Wi-Fi |
| Kapsling |
IP65 |
| Strømkabel adapter lengde |
1.50 m |
| Maksimal overføringseffekt |
15 dBm |
| Nattsyn |
15 m |
| Maksimal antenneforsterkning for overføring |
3 dBi |
| Infrarødt nattsyn |
Ja |
| Linse |
2.8 mm |
| Bilde per sekund |
25 fps |
| Enhetens inngangsforbindelse ® |
DC 5.5 x 2.1 mm |
| Maksimum forbruk strøm |
12 W |
| Maksimum oppløsning |
Full HD 1080p |
| Megapiksel |
2 MPixel |
| Effekt over Ethernet-støtte |
Nei |
| Fisheye |
Nei |
| App tilgjengelig for |
Android™ IOS |
| Send frekvensområdet |
2400 - 2483.5 MHz |
| Inngangsspenning |
12 V DC |
| Kamerautforming |
Kule |
| Driftstemperaturområde |
-20 - 50 °C |
| Lagringstype |
microSD (ikke inkludert) Cloud Storage (valgfritt) |
Vise alle produkter i:
Sikkerhet & Personvern » Ip-Sikkerhet » Utendørs
Smarthus » Kameraer » Utendørs kameraer
Sikkerhet & Personvern » Ip-Sikkerhet » Utendørs
Smarthus » Kameraer » Utendørs kameraer
Vanlige spørsmål
Vi har funnet følgende spørsmål til deg på engelsk
How do I save a recording?
Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.
What will happen if my SD-Card / Memory is full?
When you SD-Card or Memory is full, the oldest file will be overwritten.
Does the camera support cloud storage?
Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
Can I stream the livefeed of the camera to a pc?
No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.
When I enter the IP address of this camera I see a login screen. How do I log in?
Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.
We are looking to add this functionality in the future.
I get an error that my password or SSID is too long.
You can bypass this error message.
- Click on OK and go on with the installation and follow the instructions.
Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.
If the QR-code can't be scanned, you can use the SmartConfig mode.
tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
- Click on OK and go on with the installation and follow the instructions.
Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.
If the QR-code can't be scanned, you can use the SmartConfig mode.
tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.
The videostream is at moment not working with Google/NEST Hub.
The SD-card is not working at the camera.
Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
The camera does not recognise the QR code
Please try the EZ mode installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
If I subscribe to the cloud service in the VAS menu, does a single subscription work for all my Smartlife camera devices?
No, it only works for the camera device you have subscribed it with.
The Smart installation method does not seem to work, how do I install it?
In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
Can I use a really fast ultra/extreme/Evo/pro/canvas memory card in this device?
These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
Trenger du hjelp med dette produktet?
Manual Manual Datablad Datablad Sales sheet Sales sheet KvalitetsdokumenterTa kontakt med vårt support team for et svar på spørsmålet ditt.
Ta kontakt