Sikkerhet og sikkerhet/Kameraer/Utekameras

SmartLife Utendørs kamera

Wi-Fi | Full HD 1080p | Panorering og vipping | IP65 | Cloud Storage (valgfritt) / Internt 16GB | 12 V DC | Med bevegelses sensor | Nattsyn | Hvit

Egenskaper

Leverandør Delenummer: WIFICO20CWT
Strek nummer: 5412810290062
• smart utendørs IP-kamera - sørger for et trådløs tilkoblet sikkerhetssystem med enkel installasjon for utendørsområdet på en eiendom.
• Full HD-oppløsning - for å ta opp krystallklare bilder
• enkelt å koble direkte til Wi-Fi-nettverket - trenger ikke et separat tilkoblingspunkt
• leveres med et kamerafeste
• fullt støttet av alle andre produkter i Nedis® SmartLife-serien
Hjemmeautomatisering ble akkurat mye enklere. Dette brukervennlige smarte utendørs IP-kameraet kan enkelt kobles til det eksisterende Wi-Fi-nettverket for å overvåke utendørsområdene rundt huset og ta opp lyd eller bevegelse.

Full HD-oppløsning
Det registrerer i Full HD-oppløsning (1920 x 1080 piksler) som gir bilder med fullstendig klarhet. I tillegg er kameraet like kraftig om natten med nattsynmodus som har en rekkevidde på 15,0 m.

Vanntett
Dette IP-kameraet er fullstendig integrert i et ekstremt solid vanntett hus og har rikelig med internt minne på 16 GB.

Krystallklart
Kameraet tar opp Full HD-videoer og bilder på 1920 x 1080 piksler med CMOS-sensoren på 1/3 tomme for krystallklar oppløsning. Kameraet aktiveres når det oppdager lyd eller bevegelse.

Toveiskommunikasjon
Det er mulig å kommunisere via kameraet ettersom toveis snakking og lytting er aktivert - noe som betyr at det kan brukes på nesten samme måte som en telefon når de er innenfor området.

Enkelt oppsett
Det medfølger et kamerafeste med enheten, og hurtigoppstartsveiledningen sikrer at du kan installere den på bare et øyeblikk.

Om Nedis SmartLife
Oppdag et bredt og stadig større utvalg av produkter - som pærer, brytere, kontakter, sensorer og kameraer - som kan styres gjennom en brukervennlig og intuitiv app.
Enten du ser etter en enkel smart pære eller kontakt eller ønsker å automatisere hele huset, vil disse løsningene vise deg hvor tilgjengelig smartteknologi er i dag.

Emballasje

Innholdet i pakken

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Forpaknings størrelse Gaveeske med eurolock

Bredde Høyde Lengde
95 mm 95 mm 195 mm

Logistikk størrelse

Antall/kartong Bredde Høyde Lengde Vekt
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Produktspesifikasjoner

Bredde 75 mm
Høyde 105 mm
Dybde 75 mm
Vekt 350 g
Farge Hvit
Innebygd mikrofon Ja
Input Current 1.0 A
Strømkildetype Nettstrøm drevet
Materiale Plast
Nettplugg Euro / Type C (CEE 7/16)
Cloud innspilling funksjonalitet Ja
Innebygget høytaler Ja
Kompatibel med Nedis® SmartLife
Betraktningsvinkel 110 °
Bildebrikke 1/3" CMOS
LED 1
Tilbehør Kamera Mount
AC-Adapter, Europaisk Plugg
Kapsling IP65
Strømkabel adapter lengde 1.50 m
Maksimal overføringseffekt 15 dBm
Nattsyn 15 m
Maksimal antenneforsterkning for overføring 3 dBi
Infrarødt nattsyn Ja
Linse 2.8 mm
Bilde per sekund 25 fps
Lagringstype Internt 16GB
Cloud Storage (valgfritt)
Enhetens inngangsforbindelse ® DC 5.5 x 2.1 mm
Maksimum forbruk strøm 12 W
Maksimum oppløsning Full HD 1080p
Hellingsvinkel 85 °
Megapiksel 2 MPixel
Pan grader 355 °
Kamerautforming PTZ-Kamera
Effekt over Ethernet-støtte Nei
Fisheye Nei
Med bevegelses sensor Ja
App tilgjengelig for Android™
IOS
Send frekvensområdet 2400 - 2483.5 MHz
Inngangsspenning 12 V DC
Panorering og vipping Ja
Dimbar Ja
Støttet trådløs teknologi Wi-Fi
Programmerbar Ja
Driftstemperaturområde -20 - 50 °C
Antall produkter i pakken 1 stk.

Støtte

Vanlige spørsmål

Vi har funnet følgende spørsmål til deg på engelsk

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.