Safety and Security/Doorbells/Video Doorbells

SmartLife Video Doorbell

Wi-Fi | Battery Powered | Full HD 1080p | Cloud Storage (optional) / microSD (not included) | IP54 | With motion sensor | Night vision | Grey

Features

Vendor Part Number: WIFICDP20GY
EAN number: 5412810330287
• Sends push notifications to your smartphone if someone approaches (PIR motion detector) or rings the bell
• Battery powered - offering a 100% wireless solution
• Motion detection can also be deactivated (e.g. if your door faces the street directly)
• 2-way communication to talk to your visitors wherever you are
• Full HD recording (1080p) and digital zoom on your smartphone for a detailed view
• Recordings are stored on a MicroSD card up to 128 GB (not incl.) - watch back what happened
• Integrated in the Nedis® SmartLife app
• Expandable with wireless door chime (WIFICDPC10BK - not incl.) so you'll hear the doorbell when you're at home, no matter where your phone is
With this Nedis SmartLife video doorbell you always know there’s someone at your door, no matter where you are. As soon as your visitor rings the doorbell or, thanks to the accurate PIR motion detector, even approaches your front door, you’ll receive a push notification on your smartphone. You can then start a video call, asking the courier to drop off the parcel at your neighbours or tell that salesman you’re not interested - all without opening the door.

Given that you’re able to respond from any location in the world as long as your smartphone has an internet connection, this also increases home security, by making it seem like you’re at home.
The Full HD camera (1080p) has a 180° viewing angle and supports night vision, enabling you to clearly see who is at your door 24 hours a day.

No worries if you don’t have time to answer the door. The images are stored on a microSD card so you can watch them any time you like.

This 100% wireless video doorbell is easy to install as it is battery powered and therefore doesn't need any connection except Wi-Fi.
Expand this video doorbell with our Nedis doorbell chime (WIFICDPC10BK) to hear the chime even if your smartphone is switched off.

Packaging

Package contents

Video Doorbell
Wall bracket
USB cable
Installation materials
Quick start guide

Retail package dimensions Giftbox with eurolock

Width Height Length
162 mm 95 mm 100 mm

Logistic dimensions

Packed per Width Height Length Weight
1 105 mm 120 mm 165 mm 377 g
10 335 mm 120 mm 495 mm 4100 g
20 355 mm 265 mm 510 mm 8860 g

Product specifications

Width 50 mm
Height 141 mm
Depth 33 mm
Weight 225 g
Device power input connection(s) Micro USB
Input current 1.0 A
Power source type Battery Powered
Power cable side B Micro USB
Power cable side A USB
Colour Grey
Material Plastic
Cloud Recording Functionality Yes
LED 1
Night vision 5 m
Compatible with Nedis® SmartLife
Input voltage 5 V DC
Maximum transmit antenna gain 2 dBi
Maximum resolution Full HD 1080p
With motion sensor Yes
Accessories Installation Material
Required batteries (included) 2x 18650
App available for Android™
IOS
Image chip 1/2.9” CMOS
Transmit frequency range 2412 - 2472 MHz
Storage type microSD (not included)
Cloud Storage (optional)
Maximum power consumption 2 W
Battery capacity 5200 mAh
Maximum transmit power 13 dBm
IP rating IP54
Viewing angle 180 °
Lens 1.4 mm
Supported wireless technology Wi-Fi
Number of Products in Package 1 pcs
Operating temperature range -20 - 50 °C
Max. battery life 4 months
Number of melodies 1 Melody

Support

Frequently asked questions

We have found the following questions for you in English

1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range

Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.

Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.

Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.

It is not possible to change the tone and volume on this doorbell model.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.