Smartlife Videointerfono
Wi-Fi | Alimentado por baterias | Full HD 1080p | Almacenamiento en la Nube (opcional) / microSD (no incluida) | IP54 | Con sensor de movimiento | Visión nocturna | Gris
Características
• Alimentación por batería: ofrece una solución 100 % inalámbrica• También se puede desactivar la detección de movimiento (por ejemplo, si la puerta está directamente orientada hacia la calle)
• Comunicación bidireccional para hablar con los visitantes desde cualquier lugar
• Grabación en Full HD (1080p) y zoom digital en su smartphone para obtener una vista detallada
• Las grabaciones se almacenan en una tarjeta microSD de hasta 128 GB (no incluida) para verlas en cualquier momento
• Integrado en la aplicación SmartLife de Nedis®
• Ampliable con timbre inalámbrico (WIFICDPC10BK, no incluido) para que pueda oír el timbre cuando esté en casa aunque no tenga el teléfono cerca
Dado que puede responder desde cualquier lugar del mundo, siempre que su smartphone tenga conexión a Internet, también aumenta la seguridad doméstica porque parecerá que está en casa.
La cámara Full HD (1080p) ofrece un ángulo de visión de 180° y visión nocturna, lo que le permite ver claramente quién está en la puerta las 24 horas del día.
No se preocupe si no dispone de tiempo para responder al timbre. Las imágenes se almacenan en una tarjeta microSD para que pueda verlas en cualquier momento.
Este videoportero 100 % inalámbrico es fácil de instalar, ya que funciona con batería y, por lo tanto, tan solo necesita una conexión Wi-Fi.
Amplíe las funciones de este videoportero con la unidad de timbre de Nedis (WIFICDPC10BK) para escuchar el timbre incluso si su smartphone está apagado.
Embalaje
Contenido del envase
Videoportero
Soporte de pared
cable USB
Materiales de instalación
Guía de inicio rápido
Dimensiones del envase Caja de regalo con eurolock
Ancho | Alto | Largo |
---|---|---|
162 mm | 95 mm | 100 mm |
Dimensiones logísticas
Envasado por | Ancho | Alto | Largo | Peso |
---|---|---|---|---|
1 | 105 mm | 120 mm | 165 mm | 377 g |
10 | 335 mm | 120 mm | 495 mm | 4100 g |
20 | 355 mm | 265 mm | 510 mm | 8860 g |
Especificaciones de los productos
Ancho |
50 mm |
Alto |
141 mm |
Profundidad |
33 mm |
Peso |
225 g |
Conexión de entrada de potencia de dispositivo |
Micro USB |
Corriente de Entrada |
1.0 A |
Tipo de fuente de alimentación |
Alimentado por baterias |
Cable de alimentación lado B |
Micro USB |
Cable de alimentación lado A |
USB |
Color |
Gris |
Materiales |
Plástico |
Funcionalidad de grabación en la nube |
Sí |
Visión nocturna |
5 m |
Compatible con |
Nedis® SmartLife |
LED |
1 |
Tensión de entrada |
5 V DC |
Máximo alcance de transmición de antena |
2 dBi |
Resolución máxima |
Full HD 1080p |
Con sensor de movimiento |
Sí |
Accesorios |
Material de Instalación |
Requiere baterías (incluidas) |
2x 18650 |
App disponible para |
Android™ IOS |
Chip de imagen |
1/2.9” CMOS |
Rango de frecuencia de transmición |
2412 - 2472 MHz |
Consumo máximo de energia |
2 W |
Capacidad de la batería |
5200 mAh |
Tipo de almacenamiento |
Almacenamiento en la Nube (opcional) microSD (no incluida) |
Máximo poder de transmición |
13 dBm |
Estanqueidad |
IP54 |
Ángulo de visión |
180 ° |
Lente |
1.4 mm |
Tecnología inalámbrica compatible |
Wi-Fi |
Número de melodias |
1 Melodía |
Rango de temperatura en la que opera |
-20 - 50 °C |
Cantidad de productos por paquete |
1 uds. |
Máx. vida de batería |
4 meses |
Soporte
Preguntas Frecuentes
Hemos encontrado las siguientes preguntas para usted en inglés
How do I pair the gong to the WIFICDP20xx doorbell?
1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range
Can I adjust the volume and tone of the WIFICDPC10BK wireless chime?
Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.
I can't find the doorbell settings menu to pair the gong.
Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.
Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.
It is not possible to change the tone and volume on this doorbell model.
Can I use a really fast ultra/extreme/Evo/pro/canvas memory card in this device?
These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.
The camera does not recognise the QR code
Please try the EZ mode installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.