Seguridad y Protección/Timbres/Vídeo Timbres

Smartlife Videointerfono

Wi-Fi | Alimentado por baterias | Full HD 1080p | Almacenamiento en la Nube (opcional) / microSD (no incluida) | IP54 | Con sensor de movimiento | Visión nocturna | Gris

Características

Código del proveedor: WIFICDP20GY
Código EAN: 5412810330287
• Envía notificaciones a su smartphone si alguien se acerca (detector de movimiento PIR) o llama al timbre
• Alimentación por batería: ofrece una solución 100 % inalámbrica• También se puede desactivar la detección de movimiento (por ejemplo, si la puerta está directamente orientada hacia la calle)
• Comunicación bidireccional para hablar con los visitantes desde cualquier lugar
• Grabación en Full HD (1080p) y zoom digital en su smartphone para obtener una vista detallada
• Las grabaciones se almacenan en una tarjeta microSD de hasta 128 GB (no incluida) para verlas en cualquier momento
• Integrado en la aplicación SmartLife de Nedis®
• Ampliable con timbre inalámbrico (WIFICDPC10BK, no incluido) para que pueda oír el timbre cuando esté en casa aunque no tenga el teléfono cerca
Con este videoportero SmartLife de Nedis podrá saber en todo momento si hay alguien en la puerta, independientemente de dónde se encuentre. Recibirá una notificación en su smartphone en cuanto un visitante llame al timbre o se acerque a la puerta gracias al detector de movimiento PIR. Entonces, puede iniciar una videollamada para pedirle al mensajero que deje el paquete en la casa de los vecinos o indicarle al vendedor que no está interesado, sin necesidad de abrir la puerta.

Dado que puede responder desde cualquier lugar del mundo, siempre que su smartphone tenga conexión a Internet, también aumenta la seguridad doméstica porque parecerá que está en casa.
La cámara Full HD (1080p) ofrece un ángulo de visión de 180° y visión nocturna, lo que le permite ver claramente quién está en la puerta las 24 horas del día.

No se preocupe si no dispone de tiempo para responder al timbre. Las imágenes se almacenan en una tarjeta microSD para que pueda verlas en cualquier momento.

Este videoportero 100 % inalámbrico es fácil de instalar, ya que funciona con batería y, por lo tanto, tan solo necesita una conexión Wi-Fi.
Amplíe las funciones de este videoportero con la unidad de timbre de Nedis (WIFICDPC10BK) para escuchar el timbre incluso si su smartphone está apagado.

Embalaje

Contenido del envase

Videoportero
Soporte de pared
cable USB
Materiales de instalación
Guía de inicio rápido

Dimensiones del envase Caja de regalo con eurolock

Ancho Alto Largo
162 mm 95 mm 100 mm

Dimensiones logísticas

Envasado por Ancho Alto Largo Peso
1 105 mm 120 mm 165 mm 377 g
10 335 mm 120 mm 495 mm 4100 g
20 355 mm 265 mm 510 mm 8860 g

Especificaciones de los productos

Ancho 50 mm
Alto 141 mm
Profundidad 33 mm
Peso 225 g
Conexión de entrada de potencia de dispositivo Micro USB
Corriente de Entrada 1.0 A
Tipo de fuente de alimentación Alimentado por baterias
Cable de alimentación lado B Micro USB
Cable de alimentación lado A USB
Color Gris
Materiales Plástico
Funcionalidad de grabación en la nube
Visión nocturna 5 m
Compatible con Nedis® SmartLife
LED 1
Tensión de entrada 5 V DC
Máximo alcance de transmición de antena 2 dBi
Resolución máxima Full HD 1080p
Con sensor de movimiento
Accesorios Material de Instalación
Requiere baterías (incluidas) 2x 18650
App disponible para Android™
IOS
Chip de imagen 1/2.9” CMOS
Rango de frecuencia de transmición 2412 - 2472 MHz
Consumo máximo de energia 2 W
Capacidad de la batería 5200 mAh
Tipo de almacenamiento Almacenamiento en la Nube (opcional)
microSD (no incluida)
Máximo poder de transmición 13 dBm
Estanqueidad IP54
Ángulo de visión 180 °
Lente 1.4 mm
Tecnología inalámbrica compatible Wi-Fi
Número de melodias 1 Melodía
Rango de temperatura en la que opera -20 - 50 °C
Cantidad de productos por paquete 1 uds.
Máx. vida de batería 4 meses

Soporte

Preguntas Frecuentes

Hemos encontrado las siguientes preguntas para usted en inglés

1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range

Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.

Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.

Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.

It is not possible to change the tone and volume on this doorbell model.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.