SmartLife Älypistorasia
Wi-Fi | Virtamittari | 3680 W | Maadoitettu virtaliitin / Tyyppi F (CEE 7/7) | -20 - 50 °C | Android™ / IOS | Valkoinen
Ominaisuudet
• Mahdollistaa etähallinnan ja automaattisen ohjauksen laitteiden ajastusta ja yhdistämistä varten
• Tukee ääniohjausta Amazon Alexa- tai Google Home -järjestelmien kautta
Helppo asentaa
Sinun ei tarvitse olla tekniikkanero eikä sähköasentaja, että voit ohjata ja automatisoida kodin sähkölaitteita. Tarvitset vain älypistokkeen ja Wi-Fi-reitittimen. Intuitiivisen sovelluksemme avulla voit kytkeä ja katkaista koneiden virran etätoiminnolla ja automaattisesti. Sitä voi käyttää myös ääniohjausjärjestelmien, kuten Amazon Alexan tai Google Homen kanssa.
Ajasta ja yhdistä
Ajasta pistoke kytkemään laitteet päälle tai yhdistä ne muihin, jotta voit luoda ympäristölle asetuksia, jotka voidaan ottaa käyttöön yhdellä komennolla tai napin painalluksella.
Valvo virrankäyttöä
Voit nähdä kerralla kaikki laitteet, jotka kuluttavat liikaa virtaa, ja varmistaa, että kotisi on älykäs ja energiatehokas.
Nedis SmartLife
Löydä laaja ja alati kasvava valikoima tuotteita, kuten polttimoita, katkaisijoita, pistorasioita, antureita ja kameroita, joita voi ohjata helppokäyttöisellä ja intuitiivisella sovelluksella. Koska ääniohjaus tukee Amazon Alexa- ja Google Home -järjestelmiä, etkä tarvitse muuta kuin nykyisen Wi-Fi-verkkosi, saat yhdistetyn älykodin helposti.
Etsitpä sitten yksittäistä älypolttimoa tai -pistorasiaa tai haluat automatisoida koko kotisi, tutustu siihen, kuinka helposti saatavilla älyteknologia on nykyään.
Pakkaus
Pakkaussisältö
Älypistoke
Pika-aloitusopas
Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella
Leveys | Korkeus | Pituus |
---|---|---|
103 mm | 157 mm | 61 mm |
Logistiset mitat
Pakattu per | Leveys | Korkeus | Pituus | Paino |
---|---|---|---|---|
1 | 105 mm | 150 mm | 60 mm | 159 g |
5 | 115 mm | 140 mm | 325 mm | 900 g |
40 | 340 mm | 300 mm | 465 mm | 7680 g |
Tuotteen tekniset tiedot
Leveys |
55 mm |
Korkeus |
100 mm |
Syvyys |
75 mm |
Paino |
104 g |
Väri |
Valkoinen |
Materiaali |
Muovi |
Sopii käytettäväksi |
Nedis® SmartLife |
Maksimi lähetysantennin vahvistus |
2 dBi |
Virtamittari |
Kyllä |
Laitteen tulovirran liittimet |
Hybrid (CEE 7/7) |
Maksimi lähetysteho |
15.73 dBm |
Lähtöteho |
3680 W |
Tulovirta |
16 A |
Sovellus saatavana kohteeseen |
Android™ IOS |
Lähetystaajuuden alue |
2412 - 2472 MHz |
Virtapistoke |
Tyyppi F (CEE 7/7) |
Pakkaustyyppi |
Gift Box with Euro Lock |
Tuettu langaton tekniikka |
Wi-Fi |
Toimintalämpötila-alue |
-20 - 50 °C |
Laitteen lähtövirran liittimet |
Maadoitettu virtaliitin / Tyyppi F (CEE 7/7) |
Maadoituksen tyyppi |
Maadoitettu virtaliitin |
Tulojännite |
230 V AC |
Tuki
Usein kysytyt kysymykset
Olemme löytäneet seuraavat kysymykset englanniksi
How do I reset the energy consumption data?
Go to the settings menu of the plug > remove device and data
Then go to Profile > settings > clear cache
Now reset the plug and add it back to the app
I want to control my Nedis SmartLife products with Google Assistant. But I can't control them.
To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.
1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.
Now, you can control your devices by Google home products.
Can I measure the energy production of solar panels with these plugs?
Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.
Can I use this plug to charge my electric car?
Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.
The plug does not want to install in the app with the EZ mode.
Please try the AP mode.
Make sure that you use a 2.4Ghz wifi network.
Reset the plug so it blinks slow.
If it blinks fast, reset it again and it will blink slowly
In the app:
+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.
Hold your phone very close to the plug during the installation
This method uses a direct connection to the device to send the info of your wifi to it.
Holding it close optimises this connection
How do i add Nedis SmartLife to Google Home?
Add the "Smart Life" service to Google Home (no Nedis in the name).
Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.
Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.