Biztonság és védelem/Kamerák/Kültéri kamerák

SmartLife kültéri kamera

Wi-Fi | Full HD 1080p | Dönthető billenthető | IP65 | Belső 16GB / Felhőalapú Tárolás (opcionális) | 12 V DC | Mozgásérzékelővel | Éjjellátó | Fehér

Jellemzők

A beszállító cikkszáma: WIFICO20CWT
EAN kód: 5412810290062
• Intelligens kültéri IP-kamera - egyszerűen telepíthető, vezeték nélkül csatlakoztatható biztonsági rendszert kínál az ingatlanok külső területeihez
• Full HD felbontás - a kristálytiszta felvételek készítéséért
• Egyszerűen csatlakoztatható közvetlenül a Wi-Fi-hálózathoz - nincs szükség külön hubra
• Fali konzollal kapható
• Teljes mértékben támogatja a Nedis® SmartLife választékának minden más terméke
Az otthoni automatizálás most még egyszerűbb. Ez az egyszerűen használható intelligens kültéri IP-kamera egyszerűen csatlakoztatható meglévő Wi-Fi-hálózatához, így megfigyelhetők a ház külső területei, és bármilyen hang vagy mozgás rögzíthető.

Full HD felbontás
A Full HD felbontásban (1920×1080 pixel) való rögzítés a megörökített képek maximális tisztaságáról gondoskodik. A kamera teljesítménye ráadásul éjszaka is ugyanolyan nagy: az éjjellátó üzemmód 15 méteres hatótávot biztosít.

Vízálló
A teljes mértékben rendkívül ellenálló borítással ellátott IP-kamera 16 GB-os nagy belső memóriával rendelkezik.

Kristálytiszta
A kristálytiszta felbontás érdekében 1/3"-es CMOS-érzékelőjével 1920×1080 pixeles felbontású Full HD videókat és képeket rögzítő kamera hang vagy mozgás észlelésére indul el.

Kétirányú kommunikáció
A kétirányú beszéd és hallgatás funkció révén a kamerán keresztül kommunikálni is lehet - ami azt jelenti, hogy a hatótávolságon belül lévő emberekkel a telefonhoz hasonló módon használható.

Egyszerű beállítás
Az egységhez kamerakonzol is tartozik, rövid üzembehelyezési útmutatójának köszönhetően pedig a telepítése sem kerül időbe.

A Nedis SmartLife
Fedezze fel az egyetlen egyszerűen használható és intuitív alkalmazáson keresztül vezérelhető termékek - például izzók, kapcsolók, aljzatok, érzékelők és kamerák - széles körű és folyamatosan bővülő választékát.
Keressen csupán egy intelligens izzót vagy aljzatot, vagy automatizálja akár az egész házat, az intelligens technológia ma már rendkívül könnyedén hozzáférhető.

Csomagolás

A csomag tartalma

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

A kiskereskedelmi kiszerelés méretei Ajándékdoboz eurolockkal

Szélesség Magasság Hossz
95 mm 95 mm 195 mm

Logisztikai méretek:

Csomagolva Szélesség Magasság Hossz Súly
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

A termék műszaki adatai

Szélesség 75 mm
Magasság 105 mm
Mélység 75 mm
Súly 350 g
Szín Fehér
Beépített mikrofon Igen
Áramfelvétel 1.0 A
Feszültség forrás típusa Hálózati Áramellátás
Anyag Műanyag
Dugasz Euro / C típus (CEE 7/16)
Felhőbe tölthető Igen
Beépített hangszórókkal Igen
A következő típusokkal kompatibilis: Nedis® SmartLife
Rálátási szög 110 °
Kép chip 1/3" CMOS
LED 1
Kiegeszitõk Kamera Támasztás
AC adapter EU Dugasszal
IP-védettség IP65
Csatlakozó adapter kábel hossza 1.50 m
Maximális adó erősség 15 dBm
Éjjellátó 15 m
Maximális adó antenna nyereség 3 dBi
Infravörös éjszakai kép Igen
Lencse 2.8 mm
Képkocka másodpercenként 25 fps
Háttértár típus Belső 16GB
Felhőalapú Tárolás (opcionális)
Eszköz táp bemeneti csatlaakozó(k) DC 5.5 x 2.1 mm
Maximális energia felhasználás 12 W
Maximális felbontás Full HD 1080p
Billenési szög 85 °
Megapixel 2 MPixel
Pásztázási szög 355 °
Kamerakialakítás PTZ Kamera
Feszültség eterneten keresztül támogatás Nem
Halszem Nem
Mozgásérzékelővel Igen
Az alkalmazás elérhető: Android™
IOS
Adó frekvencia tartomány 2400 - 2483.5 MHz
Bemeneti feszültség 12 V DC
Dönthető billenthető Igen
Csomagolásban lévő termékek száma 1 db
Állítható fényerõ Igen
Támogatott kábelnélküli technológia Wi-Fi
Programozható Igen
Működési hőmérséklet tartomány -20 - 50 °C

Segítség

Gyakran Feltett Kérdések

A következő angol nyelvű kérdéseket találtuk Önnek

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.