Sicurezza e protezione/Telecamere/Telecamere da esterno

SmartLife Telecamera per esterni

Wi-Fi | Full HD 1080p | Controllo Pan-tilt PTZ | IP65 | Cloud Storage (opzionale) / 16GB interno | 12 V DC | Con sensore di movimento | Visione notturna | Bianco

Funzioni

Codice Fornitore: WIFICO20CWT
Codice EAN: 5412810290062
• Videocamera Smart IP per esterni: offre un sistema di sicurezza facile da installare, con connessione wireless, per le aree esterne di una proprietà.
• Risoluzione Full HD per l'acquisizione di filmati ad alta definizione
• Facilmente collegabile direttamente alla tua rete Wi-Fi: non è richiesto alcun hub separato
• Fornita con supporto per videocamera
• Completamente supportata da tutti gli altri prodotti della gamma Nedis® SmartLife.
L'automazione domestica è diventata più semplice. Questa videocamera Smart IP per esterni di facile utilizzo può essere collegata facilmente alla rete Wi-Fi esistente per monitorare le aree esterne della casa e registrare qualsiasi suono o movimento.

Risoluzione Full HD
Registra con una risoluzione Full HD (1920 x 1080 pixel) per una nitidezza completa delle immagini acquisite. Inoltre, la videocamera è altrettanto potente di notte: nella modalità di visione notturna ha una portata di 15 m.

Resistente all'acqua
Completamente inserita in un involucro impermeabile ultra resistente, questa videocamera IP dispone di un'ampia memoria interna da 16 GB.

Qualità cristallina
Dotata di registrazione di immagini e video Full HD da 1920 x 1080 pixel tramite il suo sensore CMOS da 1/3" per una risoluzione di qualità cristallina, la videocamera si attiva quando rileva suoni o movimenti.

Comunicazione bidirezionale
È possibile comunicare tramite la videocamera mentre è attivata la funzione di conversazione e ascolto bidirezionale, il che significa che può essere utilizzata in modo simile a un telefono quando gli interlocutori si trovano entro la portata.

Configurazione semplificata
Insieme all'unità viene fornito un supporto per videocamera; inoltre, la relativa guida di avvio rapido garantisce un'installazione rapidissima.

Informazioni su Nedis SmartLife
Scopri un'ampia gamma di prodotti in continua espansione, come lampadine, interruttori, prese, sensori e videocamere, che possono essere controllati tramite un'app intuitiva e facile da usare.
Indipendentemente dalle tue esigenze, sia che tu sia alla ricerca di una presa o una lampadina smart sia che desideri automatizzare tutta la tua casa, scopri quanto è accessibile la tecnologia smart oggi.

Imballaggio

Contenuto della confezione

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Dimensioni e peso del prodotto Scatola regalo con eurolock

Larghezza Altezza Lunghezza
95 mm 95 mm 195 mm

Dimensioni e peso della confezione

Confezioni da Larghezza Altezza Lunghezza Peso
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Specifiche del prodotto

Larghezza 75 mm
Altezza 105 mm
Profondità 75 mm
Peso 350 g
Colore Bianco
Microfono incorporato
Corrente di ingresso 1.0 A
Tipo di alimentazione Alimentazione da rete
Materiali Plastica
Presa di corrente Euro / Tipo C (CEE 7/16)
Funzionalità di registrazione cloud
Altoparlanti integrati
Compatibile con Nedis® SmartLife
Angolo di osservazione 110 °
Chip immagine 1/3" CMOS
LED 1
Accessori Supporto per videocamera
Adattatore CA Spina UE
Protezione ingresso IP65
Lunghezza del cavo dell'adattatore di alimentazione 1.50 m
Massima potenza di trasmissione 15 dBm
Visione notturna 15 m
Guadagno massimo dell'antenna di trasmissione 3 dBi
Visione notturna a raggi infrarossi
Lente 2.8 mm
Fotogrammi al secondo 25 fps
Tipo di archiviazione 16GB interno
Cloud Storage (opzionale)
Collegamento / i di ingresso dell'alimentazione del dispositivo DC 5,5 x 2,1 mm
Assorbimento massimo 12 W
Risoluzione massima Full HD 1080p
Angolo di inclinazione 85 °
megapixel 2 MPixel
Gradi Pan 355 °
Progettazione fotocamera PTZ-Camera
Supporto Power over Ethernet PoE No
Fisheye No
Con sensore di movimento
App disponibile per Android™
IOS
Trasmissione gamma di frequenza 2400 - 2483.5 MHz
Tensione d'entrata 12 V DC
Controllo Pan-tilt PTZ
Dimmerabile
Tecnologia wireless supportata Wi-Fi
Programmabile
Intervallo operativo di temperatura -20 - 50 °C
Numero di prodotti nel pacco 1 pz.

Supporto

Domande frequenti

Abbiamo trovato le seguenti domande per te in inglese

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.