SmartLife Personenweegschaal
Wi-Fi | BMR / Botten / Gewicht / Spieren / Vet / Water | 8 | Piekbelasting: 180 kg | Android™ / IOS | Glas | Wit
Kenmerken
• Ondersteunt 8 accounts
• Slaat gegevens automatisch op in het juiste account
• Toont statistieken van diverse parameters gedurende een bepaalde periode
• Uitgebreide lichaamsanalyse - gewicht, BMI, BMR, metabolische leeftijd, vet-, water-, bot-, spier- en eiwitgehalte
• Eenvoudig te integreren in het Nedis® SmartLife systeem
• Helder, digitaal, blauwverlicht display
De weegschaal herkent de gegevens en slaat die op in het juiste account.
De app ondersteunt in totaal 8 accounts, waardoor deze weegschaal voor het hele gezin geschikt is. Hij vormt ook de ideale oplossing om de gezondheid in de gaten te houden van iemand die je dierbaar is en die gewoon niet zo handig is met apps: hij of zij hoeft alleen op de weegschaal te gaan staan en je kunt de gegevens op een later tijdstip bekijken, waar en wanneer je dat wilt.
De app houdt ook duidelijke statistieken bij, die gemeten zijn over een langere periode. Hierdoor kun je eenvoudig een gewichtsverandering vaststellen, wat zou kunnen duiden op gezondheidsproblemen. Het kan je ook motiveren om door te gaan met je dieet, omdat je je streefgewicht nadert.
* Mag niet gebruikt worden door personen met een pacemaker.
Verpakking
Inhoud verpakking
Weegschaal
Snelstartgids
Verpakingsmaat Cadeaubox
Breedte | Hoogte | Lengte |
---|---|---|
310 mm | 40 mm | 295 mm |
Logistieke afmetingen
Verpakt per | Breedte | Hoogte | Lengte | Gewicht |
---|---|---|---|---|
1 | 300 mm | 45 mm | 310 mm | 1560 g |
5 | 225 mm | 325 mm | 325 mm | 8120 g |
Productspecificaties
Breedte |
280 mm |
Hoogte |
23 mm |
Diepte |
280 mm |
Gewicht |
1345 g |
Kleur |
Wit |
Maximale antenne versterking |
0 dBi |
Type stroombron |
Batterij Gevoed |
Materiaal |
Glas |
Maximaal zendvermogen |
17 dBm |
App beschikbaar voor |
Android™ IOS |
Automatische uitschakeling |
Ja |
Zendfrequentie |
2412 - 2472 MHz |
Weegeenheden |
Kg |
Schaalfunctie |
Gewicht Botmassa Vetpercentage Spierpercentage Totale Lichaamswaterpercentage |
Maximaal weegvermogen |
180 kg |
Analoog of digitaal |
Digitaal |
Materiaal weegplateau |
Gehard Glas |
Ingangsvoltage |
4.5 V DC |
Eenheden |
Kg Lb St |
Ingangsstroom |
0.45 A |
Ondersteunde draadloze technologie |
Wi-Fi |
Maximale stroomverbruik |
0.5 W |
Piekbelasting |
180 kg |
Persoonherkenning |
Ja |
Veilig te gebruiken met pacemaker |
Nee |
Nauwkeurigheid |
100 mg |
Lichaamsanalyse |
BMR Botten Vet Spieren Water Gewicht |
Maximaal aantal mensen om te onthouden |
8 |
Weegnauwkeurigheid |
0.1 g |
Aantal producten in verpakking |
1 Stuks |
Afmeting Uitleesvenster |
30 x 73 mm |
Vereiste batterijen (niet meegeleverd) |
3x AAA/LR03 |
Geheugenplaatsen |
8 |
Ondersteuning
EU-Conformiteitsverklaring
Overige talen
Veel gestelde vragen
Wij hebben voor u de volgende vragen gevonden in het Engels
My scale gives error "LO" but i just replaced the batteries.
Please do not use rechargeable batteries at the scale.
But use Alkaline batteries only instead.
Rechargeable batteries produce 1.2V instead of 1.5V.
It shows incorrect values or it gives an Error x message in the display.
Don't stand on the scale with wet feet. Make sure your feet are dry.
You have to stand on the scale with bare feet.
Wake up the scale by pressing on it.
Wait until the wifi logo on the top left lights up, then step on the scale.
How do I switch from Kg, to pounds to Stone?
Press the button on the back a few times to cycle through the different units.
I get Err2 message on my scale?
First push the scale so it wakes up.
Wait till the wifi-logo will appear in the screen.
Now you can stand at the scale.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.