Veiligheid en Beveiliging/Deurbellen/Videodeurbellen

SmartLife Videodeurbel

Wi-Fi | Transformator | Full HD 1080p | Cloud Opslag (optioneel) / microSD (niet inbegrepen) | IP54 | Met bewegingssensor | Nachtzicht | Grijs / Zwart

Kenmerken

Artikelcode fabrikant: WIFICDP10GY
EAN-nummer: 5412810311323
• Stuurt pushberichten naar je smartphone als er iemand de voordeur nadert (bewegingsdetectie) of aanbelt
• Bewegingsdetectie kan ook worden uitgezet (bijv. als de voordeur direct aan de straat grenst)
• 2-zijdige communicatie om met je bezoeker te spreken, waar je zelf ook bent
• Full HD-opnames (1080p) en digitaal inzoomen op je smartphone voor een gedetailleerd beeld
• Werkt op 12 - 24 V AC - gebruik de bedrading van je bestaande, bedrade deurbel (leeftijd en lengte van de bedrading kan resulteren in stroomverlies)
• Opnames worden opgeslagen op een microSD-kaart tot 128 GB (niet inbegrepen) - kijk terug wat er is gebeurd
• Incl. hoekbeugel voor een optimale kijkhoek
• Geïntegreerd in de Nedis® SmartLife-app
• Uit te breiden met de draadloze deurbelontvanger (WIFICDPC10BK - niet inbegrepen), zodat je de deurbel hoort als je zelf thuis bent, ongeacht waar je telefoon ligt
Met deze Nedis SmartLife videodeurbel weet je altijd dat er iemand aan de deur staat, waar je zelf ook bent. Zodra je bezoek aanbelt of, dankzij bewegingsdetectie, zelfs maar de voordeur nadert, ontvang je een pushbericht op je smartphone. Je kunt vervolgens een videogesprek starten. Vraag bijvoorbeeld de koerier het pakketje bij de buren af te leveren of meld die verkoper dat je geen interesse hebt - en dat alles zonder de deur te openen.

Gezien je van waar ook ter wereld kunt reageren als je smartphone internetverbinding heeft, vergroot deze videodeurbel tevens je woonveiligheid, omdat het lijkt of je thuis bent.

De Full HD-camera (1080p) heeft een kijkhoek van 130° en ondersteunt nachtzicht, waardoor je 24 uur per dag duidelijk kunt zien wie er aan de deur staat.

En maak je geen zorgen als je geen tijd hebt om open te doen. De beelden worden op een microSD-kaart opgeslagen, zodat je ze altijd kunt terugkijken.

De draadloze videodeurbel is eenvoudig te monteren doordat je de draden van de bestaande deurbel kunt gebruiken. Zorg wel dat de bedrade gong er tussenuit gehaald wordt en de voeding (i.c.m. de vaak lange dunne draden) krachtig genoeg is om de deurbel te voeden. Soms kan het nodig zijn deze te vervangen voor een voeding van 12V of hoger.

Inclusief hoekbeugel om de deurbel in de optimale positie te bevestigen.
Breid deze videodeurbel uit met onze Nedis deurbel-ontvanger (WIFICDPC10BK) om ook de bel te horen als je smartphone uit staat.

Verpakking

Inhoud verpakking

Videodeurbel
Muurbeugel
Hoekbeugel (om kijkhoek te optimaliseren)
Bevestigingsmaterialen
Snelstartgids

Verpakkingsafmetingen Cadeaubox met eurolock

Breedte Hoogte Lengte
140 mm 93 mm 66 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 70 mm 120 mm 140 mm 208 g
40 300 mm 360 mm 410 mm 8900 g

Productspecificaties

Breedte 44 mm
Hoogte 28 mm
Diepte 114 mm
Gewicht 112 g
Kleur Zwart
Grijs
Maximale antenne versterking 0 dBi
Ingangsstroom 1.0 A
Stroomkabel zijde B Micro-USB
Stroomkabel zijde A USB
Materiaal Kunststof
Maximale stroomverbruik 4 W
Functionaliteit voor cloud opslag Ja
Geschikt voor Nedis® SmartLife
LED 1
Maximale resolutie Full HD 1080p
Nachtzicht 10 m
Maximaal zendvermogen 18 dBm
Lens 3.2 mm
Kijkhoek 130 °
Met bewegingssensor Ja
Instelbaar volume Ja
Accessoires Hoek afstelling
Apparaat stroominput 2-draads
Type stroombron Transformator
App beschikbaar voor Android™
IOS
Beeld Chip 1/2.9” CMOS
Zendfrequentie 2400 - 2484 MHz
Type opslag microSD (niet inbegrepen)
Cloud Opslag (optioneel)
IP-codering IP54
Ondersteunde draadloze technologie Wi-Fi
Aantal melodieën 4 Melodiën
Bedrijfstemperatuurbereik -20 - 50 °C
Aantal producten in verpakking 1 Stuks
Ingangsvoltage 12 - 24 V AC

Ondersteuning

Veelgestelde vragen

De oude deurbel kunt u vervangen voor de video deurbel, controleer of uw beltrafo 12-24VAC is met minimaal 1A op elk Voltage. Het is ook nodig om de gong te verwijderen en deze draden door te verbinden zodat de videodeurbel direct verbonden is met de beltrafo. Als Gong kunt u dan de WIFICDPC10BK gebruiken.

De USB poort kan gebruikt worden om de bel van stroom te voorzien als hij nog niet is aangesloten op de draden van de beltrafo. De aansluiting is niet bedoeld om hem permanent van stroom te voorzien. De kabel past niet in het bevestigingsframe van de bel.

Nee, dit apparaat is niet compatible met Google/NEST Home hub.
De beelden zijn op dit moment niet te streamen naar een Google/NEST Hub.

Er komt niet genoeg vermogen aan bij de deurbel. Een zwaardere beltrafo kan dit verlies compenseren zodat de video deurbel werkt.

Plaats de gong zo dicht mogelijk bij de video deurbel tijdens de installatie

- Druk kort op de knop van de gong zodat het blauwe lampje blijft knipperen. Als u meerdere heeft laat u ze allemaal knipperen.
- Ga naar het menu van de deurbel zelf (tik op deurbel: live beeld > rechtsboven op "pen met streepje"
- Ga naar deurbel instellingen Als er reeds een menu staat (tone, volume etc) dan drukt u eerst op verwijderen
- Druk dan op toevoegen.
- Vrijwel direct verschijnt het menu.

Ga terug naar het hoofdmenu en test de deurbel.

Om de video deurbel te installeren drukt u de resetknop in tot u het "ding-ding-ding" geluidje hoort

De resetknop is het kleine gaatje naast de USB poort aan de onderkant van de bel. (zorg dat u het klikje voelt.)



In de app drukt u op + > camera > volgende stap > bevestig uw 2,4GHz wifi netwerk > doorgaan

Houd de QR code op uw telefoon voor de camera en beweeg deze langzaam naar de camera toe tot u het geluidje hoort

Druk op "ik hoorde de pieptoon"

De deurbel word nu geïnstalleerd

Geef hem een naam.

De beltrafo kan niet genoeg stroom geven aan de WIFICDP10GY.
Dit kan komen door verouderde bedrading en/of dat de beltrafo die u gebruikt te licht is.

Wij adviseren om de beltrafo te vervangen voor een 12 Volt beltrafo.

Een automatisering kan worden gebruikt om een bepaalt "gebeurtenis" (condition), als een trigger te gebruiken voor een aktie (Task).
Een gebeurtenis kan van alles zijn zoals Bewegings detectie, tijd, temperatuur, zonsopkomst ect.
Zo kunt u een automatisering maken dat als de zon ondergaat de lampen aangaan, u de Smartplugs aanzet of een combinatie van verschillende akties.

Nee, dit is op het moment nog niet mogelijk.

Ja dat is mogelijk.

Ieder persoon dient een account aan te maken in de SmartLife app.
Om deze personen toe te voegen als familie volg dan onderstaande stappen:

Klik linksboven op de naam van uw huis in het hoofdscherm.
Selecteer beheer huis, klik opnieuw op de naam van uw huis.
Hier ziet u uw instellingen van uw huis zoals aantal kamers, lokatie ect.
Klik hier daaronder onder de kop Familieleden op "Leden toevoegen".
Dit geeft de persoon toegang tot al uw SmartLife producten.

Wilt u een persoon alleen toegang geven tot 1 bepaald product, ga naar instellingen van het bepaalde product en selecteer "Apparaat delen" klik op toevoegen.

Dit is waarschijnlijk een wifi probleem die verschillende oorzaken kan hebben:

1.) Wifi signaal is instabiel
2.) Wifi signaal is te zwak
3.) Using an access point with the same SSID and Password that do not support IEEE802.11R standaard.

Probleem 1 kan vaak opgelost worden door uw router te herstarten.

Probleem 2 kan worden opgelost door een met een app Wifi analyzer uw signaal te controleren en eventueel om van kanaal op uw router in te stellen.

Probleem 3 Dit kunt u controleren door acces points en versterkers uit te schakelen. Als de producten dan weer online komen dan zijn de acces points en versterkers een probleem. We raden u dan aan om een Mesh systeem te gebruiken die de IEE802.11R ondersteunen (wifi6)

Wij hebben voor u de volgende vragen gevonden in het Engels

This video doorbell can indeed be powered by the existing doorbell transformer (12 - 24 VA, 1A minimum on all Voltages). But it is necessary to bypass or remove the wired gong so that the video doorbell is connected directly and exclusively to the doorbell transformer.

This can be used to provide the camera with power during testing before mounting it next to the door.

No, it does not have an internal battery and it needs to be connected to power at all times.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

The video doorbell does not receive enough power. Typically this is due to loss on the cables. A power supply with a higher Voltage and Amperage can compensate for this loss.

Plaats de gong zo dicht mogelijk bij de video deurbel tijdens de installatie
Druk kort op de knop van de gong zodat het blauwe lampje blijft knipperen. Als u meerdere heeft laat u ze allemaal knipperen.
Ga naar het menu van de deurbel zelf (tik op deurbel: live beeld > rechtsboven op "pen met streepje"
Ga naar instellingen bel
Als er reeds een menu staat (tone, volume etc) dan drukt u eerst op verwijderen
Druk dan op toevoegen.
Vrijwel direct verschijnt het menu.
Ga terug naar het hoofdmenu en test de deurbel.

- Go to the settings menu of the video doorbell

- Select doorbell settings

- Place the gong really close to the doorbell

- Give the button on the bottom of the gong a short press: the light will start flashing.

- Press the "add" button in the app (remove the tone/volume menu first if it is already there)

- The menu will appear.

- Select another tone and ring the doorbell to test

See if it resets if you connect it to a USB charger. If it does, then you will need to replace the power supply. The current power supply is not able to get enough power to the video doorbell.

Your power supply can't provide enough power to the WIFICDP10GY. Please upgrade your power supply to compensate for the loss of the cables. We recommend a 12VAC/1A or higher power supply.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Yes you can, simply install them like you would install a single one.
The difference is that you need to make all the gongs blink at the same time before you press add in the app.

No, you can't change the volume of the doorbell.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

If your phone is locked, you will only get a notification.
You can tap on this notification to go directly to the live view of the doorbell.
If the app is opened, you will get a screen as if someone is calling you.

The port is located on the bottom of the doorbell.
Use this port with a micro USB charger to install it indoors.
After it's installed you can mount it on the door again.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

You can add maximum 20 members.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.