SmartLife Rökdetektor
Wi-Fi | Värmesensor | Batteridriven | Givarlivscykel: 10 år | EN 14604 | Max. batteritid: 24 Månader | 85 dB | Vit | 1 st.
Egenskaper
• Enkel anslutning till WiFi så att du kan få meddelanden till din telefon
• Hög larmsignal som varnar alla i närheten vid fara
• Kan paras ihop med andra SmartLife-produkter, till exempel för att tända ljuset när larmet hörs
Rök- och värmedetektor med enkel installation som ansluts direkt till ditt WiFi-nät utan behov av en separat hubb.
Två säkerhetsfunktioner som känner av rökutveckling och om temperaturen ökar snabbt.
Kan enkelt paras ihop med andra SmartLife-produkter med ytterligare säkerhetsfunktioner. Det kan till exempel innebära att du ställer in dina smarta lampor så att de tänds vid rökutveckling för enklare utrymning.
Om Nedis SmartLife
Upptäck ett stort och ständigt växande sortiment av produkter - såsom lampor, brytare, uttag, sensorer och kameror - som alla kan styras med en lättanvänd och intuitiv app. Med röststyrningsfunktioner som stöds av Amazon Alexa och Google Home och utan behov av något annat än ditt befintliga WiFi-nätverk är detta ett anslutet, smart hem på ett enkelt sätt. Oavsett om du letar efter en enda smart lampa eller ett uttag, eller om du vill automatisera hela huset, kan du upptäcka hur lättillgänglig smart teknik är i dag.
Förpackning
Paketet innehåller
Rökdetektor
Installationsmaterial
Snabbstartsguide
Storlek på förpackning Presentask med eurolock
Bredd | Höjd | Längd |
---|---|---|
125 mm | 125 mm | 50 mm |
Förpackningsstorlek
Antal/kartong | Bredd | Höjd | Längd | Vikt |
---|---|---|---|---|
1 | 50 mm | 155 mm | 130 mm | 234 g |
10 | 270 mm | 145 mm | 270 mm | 2480 g |
40 | 295 mm | 315 mm | 555 mm | 10520 g |
Produktspecifikationer
Bredd |
120 mm |
Höjd |
36 mm |
Djup |
120 mm |
Vikt |
160 g |
Färg |
Vit |
Ingångsström |
1.0 A |
Typ av strömkälla |
Batteridriven |
Material |
Plast |
Ljud |
85 dB |
Med testknapp |
Ja |
Givarlivscykel |
10 år |
Med paus knapp |
Ja |
Kompatibel med |
Nedis® SmartLife |
Maximal antennförstärkning |
2 dBi |
Batteritypsenergi |
AA |
Inspänning |
3 V DC |
Maximal ström konsumtion |
3 W |
Maximal sändningseffekt |
17 dBm |
App tillgänglig för |
Android™ IOS |
Diameter |
120 mm |
Trådlös teknologi som stöds |
Wi-Fi |
Sänd frekvensområdet |
2412 - 2484 MHz |
Antal varor i paketet |
1 st. |
Kontroll genom mobilapp |
Ja |
Lifslängd i år |
2 år |
EN-uppfyllande |
EN 14604 |
Max. batteritid |
24 månader |
Kräver batterier (ingår) |
2x AA/LR6 |
Värmesensor |
Ja |
Drifttemperaturens omfång |
5 - 37 °C |
Support
Vanliga frågor
Vi har hittat följande frågor åt dig på engelska
Can I make a setting that all installed Smart Smoke alarms give alarm when 1 unit is in alarm mode?
No, this is not possible.
The smoke alarm is in standby (off-line) mode in the app, when not triggered.
If you want to hear for example, the smoke detector alarm upstairs you can use the Wi-FI Smart Siren WIFISI10CWT.
When i push the test button, I receive no notification.
Please hold the test button between the 5 - 10 seconds.
If you want to test the smoke alarm if the sensor is working.
We recommend you to use a smoke detector test spray.
I want to receive notifications from my detector.
create an automation for this:
Tap scenario > + > when the device status changes > select the device > select all the options
Send notification > receive > on > on
Save.
My device does not show up in Google Home.
This device is not compatible with Google Home.
If one detector sounds the alarm, will it trigger other detectors?
No, these detectors are not linked like that.
They are not connected to your wifi all the time.
They are in a sort of sleep mode until they measure smoke and/or heat
If this happens, they wake up, connect to your wifi and send a signal to the server which sends a notification to your phone.
Because they are not connected constantly, you can't send a signal to the detector and activate it.
You can use automations to activate sirens, lights and smart plugs for example.
Smoke detectors are showing battery low. I have changed the battery, but it still shows battery low.
push the test button, so the smoke detector will go online. Now the battery indicator will be updated.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.